873
FREE
circuits!

How to build Collection of Little Bridged Power Amplifiers

August 6, 2010 - category: Audio amplifier

Description

It is a little collection of amplifiers in bridge connection. The output power is low and they are for general use. They can be used with small active loudspeakers, car stereos etc. The only restriction, is that we should use loudspeakers with resistance above 4 ohm.

Circuit diagram: Bridged Amplifier 15W/4Ω

Circuit diagram

Parts list

  • R1-5=2.7ohms
  • R2=100ohms
  • R3-4=2.2ohms
  • R6=220ohms
  • R7=1Mohms
  • C1-9=10uF 16V
  • C2-8=220uF 16V
  • C3-4-5-7=100nF 63V
  • C6=470uF 25V
  • IC1-2=TDA2002
  • TR1=100Kohms trimmer
  • Lsp=4....8ohms/40W Loundspeaker

Circuit diagram: Bridged Amplifier 35W/8Ω

Circuit diagram

Parts list

  • R1-3-5-7-9=22Kohms
  • R2-8=680ohms
  • R4-6=1ohm
  • C1=4.7uF 16V
  • C2-7=22uF 16V
  • C3-6=220nF 100V
  • C4-9=100nF 100V
  • C5-8=200uF 25V
  • IC1-2=TDA2030 --LM1875
  • Lsp=8ohms/ 60W Loudspeaker

Circuit diagram: Bridge power amplifier 25W/4Ω

Circuit diagram

Parts list

  • R1=120Kohms
  • R2-5-6=1Kohms
  • R3-4=12 ohms
  • R7-8=1 ohm
  • C1-5-7=220uF 25V
  • C2-10-11=100nF 100V
  • C3-4=2.2uF 25V
  • C6-8=100uF 25V
  • C9=10uF 25V
  • IC1=LM2005M....TDA2005

Circuit diagram: Bridge power amplifier [Po=1W Sp1=4Ω Vs=+6V] [Po=4W Sp1=8Ω Vs=+12V]

Circuit diagram

Parts list

  • R1-2-4-5=270ohms
  • R3=2.7ohms
  • VR1=10Kohms Log. Pot.
  • TR1=470Kohms Trimmer
  • C1=100uF 25V
  • C2=100nF 100V
  • C3=10uF 25V
  • C4-5=22uF 25V
  • C6=47nF 100V
  • IC1-2= LM388







circuit from http://users.otenet.gr/~athsam/bridge_amplifier.htm

If you liked this page please consider sharing. Thanks!


Bookmark and Share

Previous and next post from Audio amplifier